Seals are the most important part of a production so that the contents of a package cannot be spilled and keep the contents from being contaminated or remain sterile the same as when they were first produced.

The Induction Sealer Machine is a simple and effective modern method for sealing bottles. Where the bottle sealing using an induction sealer machine is done automatically with an induction system that uses foil material, so that the product packaging can be tightly closed. The induction sealer machine or commonly called the induction sealer machine is an effective plastic press machine for sealing bottles.

There is no need for a complicated way to operate it. The working system requires heat that is delivered by effective induction to heat the foil. Plastic or paper induced liner will not burn. This process will glue the foil or foil to the bottle.

One thing that must be considered is the knowledge of the bottle material and also the cap material that will be used. So that between the bottle and the cap can be tightly bonded to each other, it is recommended to use the same material.

Besides PET, another material that is often used is PE. The compatibility between the bottle material and the induction liner material will tightly seal each sealed bottle until it reaches the consumer's hand.

By using an induction sealer machine, it makes it easy to install a bottle cap seal with foil material. The design of this induction sealer machine is also quite simple, made simple because it is so that this machine can be operated easily.

The design of this machine is that on the top layer there is paper pulp which is used as a place to be glued to the lid, then on the second layer it has wax which is used as a layer of aluminum as pulp. Then on the bottom layer there is a polymer film laminated with foil.

When the lid is pressed, the container through the induction coil produces an oscillating electromagnetic field. The induction coil or sealing head will then be ignited so the aluminum foil will begin to heat up.

The heat will melt the wax, which will be absorbed into the pulp and will cause the foil to fall off the top of the hat. In this case the polymer film also works to heat and transfer heat to the lip of the container. So that when cooled, the polymer film will create a bond on the container and produce a tightly sealed product.

In the process of closing the container or sealing the bottle, the process is quite fast where 1 container only takes a few seconds, and this machine can accommodate the bottle sealing process in 1 machine more than 1 container.

This automation system can improve the quality and speed of production, especially in the production of food or packaged foodstuffs. With good packaging, the durability of food can be maintained and lasts a long time. Good sealing and completely hermetically sealed will result in a product that is free from contamination and has a long life. Pressing the seal on the bottle greatly determines the quality of a production. With the right machine, perfection will be obtained so that the end result of a production can be as expected and

Where in sealing the bottle, it is not only closed, but also must be pressed so that the results are really tight. Therefore, we recommend an induction sealer machine to help press the seal on the bottle correctly.

With this machine, the bottle sealing finishing process becomes more efficient. The benefits you will get will also increase.